
Specialists in technically complex projects, delivered end to end.
We design. We manufacture. We deliver.
Who we are
RUBING is an engineering and contracting company with in-house manufacturing, based in Ostrava with its manufacturing site in Šenov u Ostravy, Czech Republic. We have been active on the market for more than 30 years, since 1995. Both founding managing directors have led the company continuously since it was established. We build technology for energy recovery from waste, including hazardous waste. We design, manufacture and install architectural facades for large buildings, industrial buildings and fixed fire suppression systems.
Two sectors that at first sight have nothing in common, yet the work in both is essentially the same.
Both involve technically demanding assemblies in steel and other materials, where what counts is precise design, manufacturing quality and the ability to take a project from the first drawing to handover. We have our own design team and carry out the technical calculations and the manufacturing ourselves, so we take full responsibility for the whole process as a single partner.

Energy
Combustion and waste-to-energy technology
We design, manufacture and deliver process units for waste incineration plants, heating plants and energy facilities, including plant for energy recovery from hazardous waste, where the demands on materials, tightness and operational reliability are exceptionally high. We manufacture steam superheaters, economisers and other boiler pressure parts in house. We modernise older energy plant, extending its service life, improving its efficiency and reducing its emissions.
Details
Construction
Industrial construction, architectural facades and fixed fire suppression systems
We design, manufacture and install architectural facades in glass, aluminium and steel, where the final quality depends on precise detailing and on how the individual materials meet. As general contractor, we deliver turnkey industrial buildings and facilities, including steel structures and cladding. Our scope also includes the design and installation of fixed fire suppression systems, which are a prerequisite for the final building approval of large industrial buildings.
DetailsWhat both sectors share
In-house engineering
We carry out all engineering in house, from design and structural assessment to thermal and strength calculations. Technical questions are therefore resolved directly by the design engineer who designed the equipment, with no hand-offs between designer, manufacturer and installation contractor.
In-house manufacturing
We manufacture key components at our own manufacturing site in Šenov u Ostravy. We have direct control over quality, production schedules and the entire supply chain, and we can respond flexibly to the technical requirements of a project.
Managing complex projects
We handle permitting, the review of the project with the authorities and the Fire Rescue Service, delivery management and the successful completion of the building through to final building approval. Throughout, you deal with a single responsible partner who coordinates all the related parts of the contract.
Our own manufacturing site in Šenov u Ostravy
In Šenov u Ostravy we operate three production halls with overhead cranes and CNC technology, covering 2,200 m². From this site we dispatch boiler pressure parts, steel structures and facade elements to customers in the Czech Republic and abroad.
Our own manufacturing allows us to take responsibility for quality and for meeting agreed deadlines. Every weld is made under the oversight of welding coordination, and every pressure part undergoes the prescribed tests before dispatch. The fabrication documentation is prepared by the same design engineers who design the equipment, so the requirements pass accurately from the design to the shop floor.
Over the last five years, we have systematically modernised our manufacturing facilities. We have expanded our manufacturing technology and installed new overhead cranes and energy-efficient lighting. At our Ostrava headquarters, a photovoltaic plant with battery storage covers part of our own consumption.

What we manufacture
Steam superheaters, economisers, boiler pressure bodies and boiler pressure parts. Steel structures up to execution class EXC3. Piping components and 3D bends. Membrane wall panels, for which we bend tubes around wall openings and assemble the panels into walls. We manufacture to our own fabrication documentation and to documentation supplied by the customer.
Manufacturing technologyOur mission and vision
Mission
We deliver complex projects in modern industrial architecture, energy, waste incineration and process units.
Combining our in-house engineering, manufacturing and delivery experience allows us to handle even technically demanding briefs.
For the customer, we are a single reliable partner that takes responsibility for the whole project, from design through manufacturing and installation to commissioning and subsequent service.
Vision
We aim to be the first choice of investors for technically demanding projects with high requirements for quality, reliability and safety over the long term.
A respected partner for industrial construction and energy plant engineering in Central Europe, with an emphasis on stability and professional excellence.
We systematically use digitalisation, BIM and artificial intelligence to improve the accuracy, speed and quality of our work at every stage. We are raising the standards of our field.
Our values
People and partnership
A good project is the work of people who have professional knowledge, room to make responsible decisions and safe conditions for their work. We develop our employees’ professional skills, encourage the sharing of experience between disciplines and aim for long-term working relationships. We take the same approach with suppliers, partners and customers. We build on open communication, fair dealing and commitments we are able to keep.
Expertise and accountability
A technically demanding project calls for competent decisions and clearly defined responsibility. We bring design, calculations, manufacturing and delivery under one roof, so that technical questions are resolved by people who understand how the whole works fit together. We are accountable for our decisions, deadlines and the quality of our supply throughout the project.
Safety and reliability
Neither waste-to-energy technology nor a fixed fire suppression system may fail at the moment the plant is under the heaviest load. We therefore build safety into design, manufacturing, installation and inspection. We pressure-test pressure parts up to 45 MPa with automatic recording, and we weld to the requirements of ČSN EN ISO 3834-2.
Innovation
We look for solutions that extend both the technical possibilities and the quality of the result. On architectural facades, we turn the architectural intent into a technically feasible solution. On refurbishments, we can work with a 3D scan of the as-built condition of the plant, and we are digitalising both design and project management. We are introducing artificial intelligence into technical and administrative processes where it brings greater efficiency and saves our specialist teams time. We also use a rare technology, mandrel-free tube bending.
Sustainability
We design technology that turns waste into usable heat and electricity and reduces dependence on landfill. Through refurbishment, we extend the life of energy plant, improve its efficiency and help reduce emissions. We take the same responsible approach in our own operations. Our environmental management system has been certified since 2009, and since 2025 we have covered part of our own energy consumption from a photovoltaic plant with battery storage.

Our commitment to quality
Contracts are prepared and delivered by our design engineers, designers, internationally qualified IWE and EWE welding coordinators, quality control technicians and site managers. They work closely together as one team. A technical query from the shop floor is therefore answered directly by the author of the design, with no intermediate hand-offs between designer, manufacturer and installation contractor.
We manage welding in accordance with the requirements of ČSN EN ISO 3834-2 and supply steel structures up to execution class EXC3. Before dispatch, every pressure part undergoes a pressure test above its future operating load. Our quality, environmental and occupational health and safety management systems are certified by independent certification bodies and regularly verified by audits.
We enter into a contract only after a thorough capacity assessment, and we commit only to terms we can meet in technology, quality and timescale. After handover, we stay in contact with the customer, provide service and offer technical support throughout the further operation of the equipment.
Key certifications
More than thirty years in business, and still on course.
-
1995
We founded the company. We started in construction with steel structures and prefabricated building envelopes. In the same year, we set up our own design department for fixed fire suppression systems.
-
2001
We expanded into the Slovak market. Rubing Slovakia was established.
-
2003
We expanded our activities in energy. We began a merger with LKH Servis, a company specialising in the servicing of energy plant.
-
2006
With the completion of the merger, we took over a team of experienced thermal power engineers and, with it, boilermaking know-how.
-
2009
We obtained our first management system certifications, ISO 9001 and ISO 14001, followed a year later by an occupational health and safety management system.
-
2010
Production moved to a larger manufacturing site in Šenov.
-
2012
We strengthened our pressure assembly manufacturing with the purchase of the HERBER 90 CNC bending centre. The project was partly funded by the EU.
-
2015
We completed the cladding of the supercritical unit at Ledvice Power Station, the tallest industrial structure in the Czech Republic.
-
2020
We bought the previously leased production premises in Šenov and expanded them.
-
2022
We modernised the manufacturing site, fitting the halls with new lighting and new overhead cranes.
-
2024
Completion of the architectural facade of the Victoria Palace residential building on Vítězné náměstí in Prague.
-
2025
We modernised the manufacturing site in Šenov, installed photovoltaics with battery storage at our Ostrava headquarters and introduced digital design.
Tell us what you are planning.
A technically demanding brief and a fixed deadline are a combination we have worked with for more than thirty years.
Contact us