Parts where precision, material and documented quality are decisive.

We manufacture technically demanding parts and assemblies for the energy sector and industrial construction, from steam superheaters and economisers to steel structures up to execution class EXC3. We work to our own fabrication documentation as well as to documents supplied by the customer. The fabrication documentation is prepared by the same design engineers who designed the equipment, so technical questions from the shop floor go directly to the author of the design.

What we manufacture

Steam superheaters and economisers

Tube coils made from mandrel-free bent tubes, including headers. We supply them as complete assemblies for new boilers and as replacements for existing equipment.

Boiler pressure bodies and boiler pressure parts

We manufacture and assemble designated pressure equipment and, before dispatch, subject it to pressure tests up to 45 MPa with automatic recording.

Steel structures up to EXC3

We manufacture load-bearing structures for industrial buildings, cladding and process structures up to execution class EXC3 (EN 1090-1), with CE marking.

Piping components and 3D bends

We form tubes of Ø 20–90 mm into 3D bends using mandrel-free bending, with a centreline bend radius of 50–250 mm.

Membrane wall panels

We manufacture membrane wall panels, bend tubes around wall openings and assemble the panels into walls.

Facade components

We manufacture anchoring and adjustment components for architectural facades to fabrication documentation produced from our own 3D model.

Technology that determines the result

The equipment at our manufacturing site in Šenov matches the demands and nature of our production. It covers each step of the manufacturing process, from cutting material with band saws, plasma and oxy-fuel, through mandrel-free CNC tube bending, shell rolling and milling of bevels on plates and tubes, to positioning for welding, permanent marking of parts and pressure tests with digital recording. For welding we use digitally controlled Fronius power sources.

Key technology

CNC bending centre HERBER 90 CNCTB

A fully automatic CNC bending centre from Herber Engineering for tubes of Ø 20–90 mm. Bending is mandrel-free. A booster pushes the tube into the bend at a programmable pressure and speed, which limit wall thinning and ovality at the bend, that is, the parameters checked at acceptance of pressure parts. We bend tube coils for superheaters, economisers and evaporators, tube elements for membrane walls and headers. A bend replaces a welded elbow, which reduces both the number of welds and the extent of NDT.

Bending technology
mandrel-free, booster
Tube diameters
Ø 20–90 mm
Capacity at a strength of 400 N/mm²
Ø 90 × 5 mm
Centreline bend radius
50–250 mm
Booster force
200 kN
Max. tube length
4,000 mm
Max. bend angle
210°
Bending speed and repeatability
0–40 °/s, ± 0.1°
Tooling set
Ø 31.8–70.1 mm
Control
CNC Bosch Rexroth MTX, material database for springback correction

Key technology

Plate rolling machine HRB‑4 3020

A four-roll hydraulic plate rolling machine from DURMA with pre-bending. We roll cylindrical shells for pressure vessels and storage tanks, boiler pressure bodies and heat exchanger bodies, conical transitions and structural segments. The working length of the rolls allows a 3,000 mm plate to be processed without a circumferential weld.

Working length of rolls
3,100 mm
Rolling thickness
up to 20 mm
Pre-bending thickness
up to 16 mm
Top roll
Ø 360 mm
Bottom roll
Ø 330 mm
Side rolls
Ø 270 mm
Reference material
yield strength 240 N/mm²
Control
PLC, side roll parallelism shown on the display

Band saws Pilous ARG 400 and ARG 500 Plus S.A.F.

Two semi-automatic gravity band saws with hydraulic arm feed and an automatic cycle. We cut bars, sections and tubes for steel structures and piping assemblies, including mitre cuts at 45° and 60°, and prepare tube blanks for the HERBER bending centre and section blanks for welded assemblies. The two sizes cover the range from small sections to beams and tubes up to Ø 500 mm.

Cutting range, round at 90°
Ø 400 mm and Ø 500 mm
Cutting range, rectangle at 90°
480 × 170 mm and 620 × 450 mm
Arm swivel
90°, 45° in both directions, 60°
Blade speed
15–90 m/min and 20–90 m/min
Main motor
3.0 kW and 4.0 kW
Weight
980 kg and 1,530 kg

CNC cutting machine SCORPION 2500 GP

A gantry cutting machine from Pierce Control Automation with both plasma and oxy-fuel torches. We cut blanks for pressure vessels, that is, shells, heads, stiffening rings and nozzle cut-outs, as well as parts of steel structures. The cutting area corresponds to a standard mill plate, which we process in a single set-up.

Cutting area
2,000 × 3,000 mm
Torches
Kjellberg plasma and oxy-fuel
Oxy-fuel cutting thickness
up to 200 mm
Cutting speed
50–6,000 mm/min
Max. number of torches
4
Min. spacing of parallel cuts
90 mm
Drives
AC servo, linear guides on the transverse axis

Radial drilling machine Bernardo RD 2000 × 63

We drill and tap large parts, that is, flange holes, holes for nozzles and sockets on pressure vessels and bolt holes in steel structures. A working envelope of up to two metres from the column allows a part to be machined in a single clamping.

Drilling in steel
Ø 63 mm
Tapping
up to M56
Reach
420–2,000 mm
Vertical arm travel
800 mm
Spindle taper
MT 5
Spindle speeds
20–1,600 rpm, 16 steps
Feeds
0.04–3.2 mm/rev, 16 steps
Base plate clamping area
1,980 × 1,240 mm
Motor power
5.5 kW

Hydraulic punch PROMOTECH PRO-110 HP with HPP-700/1,5 power pack

The portable punch works cold, that is, with no heat-affected zone, and we use it both in the workshop and on site. We punch holes for bolted connections in steel structures, anchoring and pipe hangers, and slotted holes for installation clearance and expansion.

Power pack working pressure
700 bar
Punching force
47 t, that is, approx. 461 kN
Hole range
Ø 7–27 mm, round and slotted
Slotted hole
up to 25 × 18 mm
Plate thickness
up to 16 mm at Rm < 490 MPa
Throat depth
110 mm
Punching time
8 s
Tool weight
35 kg

Plate bevelling machine UZ 50 TRIUMPH with 3D manipulator

The N.KO milling bevelling machine prepares the weld faces of pressure vessels, boiler pressure bodies and beams. A milled edge has no heat-affected zone and keeps a constant groove geometry, in line with the approved welding procedure. On walls over 25 mm we mill double-sided X and K bevels.

Plate thickness
7–80 mm
Bevel angle
15–60°, continuously variable with no change of parts
Bevel types
V, double-sided X and K, combined
Milling head
Ø 85 mm, 5 inserts
Feed speed
0–1.2 m/min
Materials
structural and stainless steel, Hardox, Weldox, Duplex, aluminium, copper

Plate bevelling machine UZ 12 Ultralight

A lightweight N.KO milling bevelling machine with automatic feed. We bevel thin and medium plates for steel structures, cladding, non-pressure parts and boiler accessories.

Plate thickness
3–35 mm at 22.5°–37.5°, 3–22 mm at 45° and 50°
Bevel angles
22.5°, 30°, 37.5°, 45°, 50°, interchangeable yokes
Bevel width on steel
12 mm
Max. material strength
approx. 690 MPa
Bevelling speed
1,800 mm/min
Weight
30 kg

Tube bevelling machine MINI-E 20

An electric tube-end bevelling machine from G.B.C. that clamps inside the tube, mills an external or internal bevel and faces the end. We use it to prepare the ends of boiler tubes before welding tube coils, superheaters and economisers.

Clamping range, tube inside diameter
20–42 mm
Blades for external bevel
37°30′, 30°, 45°
Blades for internal bevel
10°, 15°, 45°
End facing
yes
Blade material
HSS with 5% or 8% Co

Welding rotator RAC 40 TON M+F

A roller rotator made up of two units turns shells of pressure vessels, boiler pressure bodies, storage tanks and large-diameter pipe components, so that we weld circumferential seams in the PA position. It follows on from the HRB-4 3020 plate rolling machine, and its load capacity also covers heavy multi-course shells.

Load capacity
40 t
Diameter range
600–4,200 mm
Rotation speed
100–1,000 mm/min
Motor power
2 × 1.5 kW
Wheels
polyurethane, self-aligning to the body diameter

Marking equipment SIC Marking P62 and P122

Portable dot-peen marking guns. A carbide stylus forms characters from a pattern of dots without compressed air or consumables. We permanently mark pressure parts, structures and welded assemblies with the job number, heat number, welder's mark and serial number directly on the part, as required for traceability at acceptance of pressure equipment and EXC3 structures.

Marking area
60 × 25 mm and 120 × 25 mm
Max. material hardness
62 HRC
Marking depth
up to 0.5 mm depending on the material, 9 force levels
Character height
0.1–99 mm
Dot resolution
0.05 mm
Codes
serial numbers, date, logos, Data Matrix

Pressure test unit TZ

On the pressure test unit we test the strength and tightness of our own products, which is a condition for issuing the declaration of conformity, as well as equipment after repairs, refurbishment and servicing. We test in the workshop and at the customer's premises. The test is recorded automatically, so the record is dispatched with the order.

Max. test pressure
45 MPa, that is, 450 bar
Test record
automatic, digital
Legal framework
PED 2014/68/EU, Government Regulation No. 219/2016 Coll., Act No. 250/2021 Coll., Government Regulation No. 192/2022 Coll.
Standards
ČSN EN 13445-5, clause 10.2.3, and ČSN 69 0012:2024

Welding power sources Fronius TPS/i, TransSteel, MagicWave and TransTig

We weld on digitally controlled Fronius inverter power sources with wire feeders and cooling units from the same manufacturer. We use the TPS/i range on pressure parts and on materials that require controlled metal transfer, that is, root passes, stainless steels and thin walls. We deploy TransSteel for high-output welding of steel structures, and MagicWave and TransTig for root passes and stainless steels using process 141.

TPS/i, processes 135 and 136
320–600 A, Standard, Pulse, LSC, PMC and CMT processes, WeldCube data recording
TransSteel, processes 135 and 136
350–500 A, 40% duty cycle at max. current, wire 0.8–1.6 mm, flux-cored wires
MagicWave, process 141
190–230 A, alternating and direct current
TransTig, process 141
190–230 A, direct current, steel and CrNi
Design
inverter, separate wire feeder, gas or water cooling

Welding processes 135, 136 and 141

We use processes 135 and 136 to weld carbon and low-alloy steels, that is, steel structures and vessel shells. We use process 141 on stainless steels, thin-walled parts, small-diameter tubes and root passes. On pressure parts we combine a 141 root with a 135 or 136 fill. The root meets the requirements of radiographic and ultrasonic testing, while the fill provides the deposition rate. We carry out welding to ČSN EN ISO 3834-2 including alloy steels.

Process 135
MAG, solid wire in active gas
Process 136
MAG, flux-cored wire in active gas
Process 141
TIG, tungsten electrode in inert gas
Shielding gases
Ar and CO₂ mixtures, 100% Ar for process 141
Welding procedure qualification
ČSN EN ISO 15614-1, level 2
Welder qualification tests
ČSN EN ISO 9606-1
Quality requirements for welding
ČSN EN ISO 3834-2
Welding coordination
ČSN EN ISO 14731

Where we manufacture

In Šenov u Ostravy we operate three production halls with overhead cranes and CNC technology, with a total floor area of 2,200 m². The company has owned the site since 2020, and over the last five years its production technology, overhead cranes and lighting have been modernised. From here we dispatch boiler pressure parts, steel structures and facade components to customers in the Czech Republic and abroad. We have supplied pressure parts and complete boiler units to countries including Romania, Sweden, Spain, France, Vietnam and Uruguay.

Certification and documented quality

We manage welding to ČSN EN ISO 3834-2 and supply steel structures up to execution class EXC3 (EN 1090-1). Our quality, environmental and occupational health and safety management systems are certified and regularly audited by an independent body.

ZIP Download all certificates
Download all certificates
Download all certificates

How we work with you

To your documentation or ours

We manufacture to the client's drawings as well as to our own fabrication documentation produced from the 3D model.

Shop-floor questions go to the author of the design

Design and manufacturing work together as one team, so technical questions do not wait for coordination between separate companies.

Tests and documentation are part of the supply

The recorded pressure test, the welding documentation and the inspection reports are dispatched with the order.

Head of division

Lyubomir Atanasov Borisov

Production manager

To discuss a manufacturing enquiry, contact our head of division, who will assess feasibility on the basis of your documentation and propose the next steps.

Do you have a part where material and precision are critical?

Send us your drawings. We will assess feasibility and propose the manufacturing and testing sequence.

Contact us